Inkjet Test
Material Compatibility Test, Extracting Ejection Conditions, Printing Sample
In the preliminary stages of considering the purchase of an inkjet system,
We can evaluate the suitability of ink for IJ and print samples.
Sample printing is paying test including technical charges together with ‘machine use charge’, ‘personnel expenses’, and ‘preparation charges (changing head and ink)’.
In case of evaluating unproven ink, please purchase necessary head for testing. Cost for testing is depend on what you’d like to do. Kindly ask quotation in advance..
Test | Contents |
1.Material Compatibility Test | This process tests the physical compatibility of the ink you have and the inkjet head. The test fee varies depending on the inkjet head types. In principle, the test is done in our company. It takes about 1 to 2 months to complete the test, including the ordering period for components. |
2.Extracting Ejection Conditions | We evaluate your ink with our drop watcher system “Dot View”.The ink ejection conditions extracted in this process are the necessary parameters for printing.
It takes about one day to evaluate one type of ink per head. Please prepare SDS and cleaning solution for the ink to be used. |
3.Making Print Samples | We make print samples using your original inks/medias with our variety of ink-jet systems. The basic charge is for a total of two days of “preparation, cleanup” and “printing” per sample creation. Please send us the image data to be used in the sample creation and the base material you wish to print out in advance. |
※Please inquire directly to our sales group for the above charges (1) to (3).
Equipment | Specification |
Dot View |
For more information, please visit the “Dot View” product page. |
Inkjet Device |
The system varies depending on the substrate size and inkjet head. |
IR Dryer ![]() |
Heater capacity: 1200 W×9 lamps |
Hot Air Dryer |
Heater capacity: 9 KW Maximum airflow: 5㎥/min Temperature range: room temperature to 350°C (maximum temperature varies depending on airflow rate) Nozzle size: 350×430 ㎜ |
Thermostatic Bath |
Convection system: Natural convection air jacket system |
Nitrogen Generator |
Nitrogen gas purity: 99.99% *The purity of the chamber varies greatly depending on the shape of the chamber. Nitrogen gas generation rate: 28.0NL/min Nitrogen gas pressure: 0.5Mpa |
Corona Processor | Rated power: 50 to 1000W Output voltage: 0 to 16kVp Treatment range: Needle electrode to 800mm electrode × 2 800mm electrode × 1 (standard) |
Microscope |
Image sensor: 12-megapixel image sensor |
Warming Table |
Size: 300mm × 300mm |
Other | Customers can also bring in their own equipment. Please contact us in advance. |