OnePass JET EB

For flexible packaging and various packages
Single-pass, EB ink-based inkjet simulation printer. 
Ideal for surface printing of flexible packaging film materials such as OPP, PET, and nylon (*).

 

---

Feature１. EB ink compatibility

Can be cured without initiator.
No migration or odor.
Supports high-speed printing with high adhesion.

 

---

Feature2. High-speed, high-resolution printing

75ｍ/min[At 600dpi]
Maximum 100m/min

 

---

Feature３. Various simulations

Pin Cure, Wet on Wet, resolution change, Irradiation energy can be examined.

 

Section name	Item		Details
Ink jet	Compatible Head		Kyocera 600dpi
	Number of Heads		2 rows x 5 colors installed(CMYK+W)
	Printing Method		Single-Pass (PinCure, Wet on wet, Can be simulated)
	Table		A4 (210ｍｍ (W) × 310ｍｍ (H))
	Head gap adjustment		Electric adjustable (0~10mm)
EB (Electron beam)	Acceleration voltage		50kV~100kV
	Irradiation ability		30kGy@100m/min
	Irradiation width		450mm (Under development with 650mm width)
Transport	Option		Can be equipped with a separate pin cure device
	Transport speed		1.27m/sec (75m/min  At 600dpi) Maximum 1.67m/sec (100m/min)
	Table		Adjustable height (0~30mm)

(*) Applicable materials and productivity vary depending on the ink used.